Rig Ready Free tools

Free tool

Will it trip the breaker?

Pick your hookup and tick what's running at the same time. You'll see the total watts against what the pedestal can supply.

  • Free, no sign-up
  • Runs in your browser
  • Shows the working

Wattages are typical running loads, so check the labels on your own appliances. Air conditioners briefly draw 2 to 3 times their running load at start-up.

Want trips and checklists built for your rig?

Two Claude skills do this kind of work with you, step by step. They work on any Claude plan, including the free one. New to Claude?

Free

Checklists skill

Builds departure and arrival lists for your rig inside Claude.

Good to know

30 amp vs 50 amp

A 30 amp RV service supplies about 3,600 watts (30 amps × 120 volts). A 50 amp RV service has two 50 amp legs, about 12,000 watts in total, which is why 50 amp rigs can run two air conditioners. A standard 15 or 20 amp household outlet gives about 1,800 to 2,400 watts: enough for the fridge, lights and charging, not the AC.

Why the breaker trips

The usual culprits are the air conditioner plus a microwave, electric water heater or hair dryer at the same time. Hidden loads add up too: the battery charger can pull several hundred watts after a night of boondocking.

How to stay under

Run one big load at a time, switch the water heater and fridge to propane while the AC runs, and consider a soft-start kit for the AC. A surge protector or EMS protects the rig from bad pedestals.

Back to Rig Ready